Cost-effective and versatile SLM system targeted at both R&D and industrial clients. We are proud of its excellent balance of cost and capabilities.

Small features: from 0.1mm, print parts up to 220mm in height.

Things we love in the AM3D-PRO:

300W/500W IPG Photonics fiber laser
We use only the best lasers for our printers. IPG Photonics have been at the forefront of the industry from 1990.

Custom software, firmware and hardware
We make the most out of every component. By building all the critical elements in-house, we retain the highest process parameters control in the industry, up to the microseconds time interval.

Absolute encoders
Absolute encoders for high reliability. Maintain high quality even after power loss or a print 'pause'. Pause printing for the weekend and restore the process at ease on Monday.

C5/C3 grade precision ballscrews
Precision ground ballscrews guarantee even layer height to get better model uniformity and less porosity.

AM3D Slicer
Easy-to-use but powerful software that makes you feel like a 3D printing pro right from the start.

Materials library
Predefined profiles for selected materials. To get better and reliable results in every print.

Air or water-cooled lasers
Cooling provides greater stability, providing for 3D printing results of highest quality.

Recirculating inert atmosphere
Recirculation helps to reduce inert gas consumption. Typically, the printer consumes about 2-3 liters per minute or even less.

Remote diagnostics and monitoring
Remote monitoring allows you to know what's happening with the printer even if you are on the other side of the Earth.

Technical Specifications

Cylindrical

220mm height

300W / 500W laser

ø150mm

220V/15A

Argon

1470mm

760mm

1890mm

building volume

(more than 8 21/32")

or more for higher printing rate

recirculating inert atmosphere

(ask for 110V)

(more than 5 7/8")

width / 4.8ft

length / 2.5ft

height / 6.2ft